Atrium Dept. of WDI a distributor of Atrium locks for swinging and sliding patio doors including two inch backset sells mortise locks by Papaiz and Marks for security storm doors, lever extenders, push-pull and kick plates, house numbers and crystal door knobs.

9 Items

Current Category : 2" Backset Locks
Hardware for narrow stile doors with double bore.

Click on the items below for a description and detailed picture.
SKU	Item Name
SKU: ATAUL80 150X	$79.00
2" Backset Low Profile Leverset	2" Backset Solid Brass Passage leverset with 3-1/8" Low Profile Levers and 2-5/8" Roses, Projection is only 1-1/4" off of face of door and will not interfer with the screen door. Similar in design to the old National and Amerock passage levers. 2-1/8" face bore and 1" edge bore. On doors with 1-7/8" face bore, hole edges may have to be beveled slightly to recess concealed mounting plate. Displayed in Polished Brass finish.
		Order Now

SKU: ATAUL81	$59.00
2" Backset Single Cylinder Deadbolt	2" Backset Brass Single Cylinder Deadbolt, Mortise/Rim Cylinder with Schlage Keyway and 2 keys. Fits 2-1/8" or 1-7/8" bore. Key outside and turnknob inside.
		Order Now

SKU: ATAUL80 345X	$69.00
2" Backset Solid Brass Passage Leverset with Straight Levers	2" Backset Solid Brass Passage Leverset with Straight Levers. 4" Lever, 2-3/4" Projection (may interfer with screen), 2-5/8" Rose, 2-1/8" Face Bore and 1" Edge Bore, Concealed Mount. On doors with 1-7/8" face bore, edges may have to be beveled slightly to recess concealed mounting plate. Displayed in Polished Brass Finish.
		Order Now

SKU: ATAUL80 130X	$69.00
2" Backset Traditional Curved Lever and Rose	2" Backset Solid Brass Passage Leverset. 2-1/8" Face Bore and 1" Edge Bore - Concealed Mount - 2-3/4" Projection (may interfer with screen door) 4-1/2" Lever and 2-5/8" Rose. On doors with 1-7/8" face bore, edges may have to be beveled slightly to recess concealed mounting plate. Displayed in Polished Brass finish.
		Order Now

SKU: ATAUL5MULT	$185.00
FERCO 528 Replacement Lock System	Variable length replacement lock and gear (shown to left of diagram) for the original Atrium French Classic multi-point lock made by Ferco (Ferco 528 - 28mm backset and 70mm center to centers). Includes 7MM spindle, spindle adapters, and shoot bolts. Original French Classic Diagram shown here for identification purposes only. It shows the lock, gear, and trim. SKU: ATAULMULT sold here does not include the trim (handle set and plates). It is the lock mechanism only. Installation requires minor modification to edge bore of door and relocation of roller pin strike plates. Latch is field reversible.
		Order Now

SKU: GU-Woodgrain	$185.00
G-U 3 point replacement mortise lock	G-U 3 point replacement lock for single-swing Atrium doors by Woodgrain Millwork prior to Oct. 1997. Lock design changes were made to lock body and manual tongue locking points. Replacement designed to fit existing door machining and handlesets. 45 MM backset, silver face plate, same locking locations, reversible latch for handing. Bottom of spring loaded latch is 1/8" lower than old so strike plate might have to be lowered or filed down slightly. Photo shows old lock body on top and new at bottom.
		Order Now

SKU: D06-K251J	$172.50
Rope Knob and Plate Set	Solid Brass Rope Knob and Plate Set with 2-3/8" Passage - Single Cylinder Deadbolt w/ Schlage Keyway. Double 2-1/8" bore 5-1/2" on centers. 3" X 12" Plate size, 2-1/4" Knob, 2-5/8" Projection. Surface Mount. Priced in Polished Brass Finish.
		Order Now

SKU: D06-L026J	$162.00
Rope Lever & Oval Plate Set	Solid Brass Rope Lever & Oval Plate Set. 2-3/8" Passage - Single Cylinder Deadbolt w/ Schlage Keyway. Double 2-1/8" bore on 5-1/2" centers. 4" Lever, 2-1/2" X 10-1/2" Plate, 2-1/2" Projection. Surface Mount. Priced in Polished Brass Finish.
		Order Now

SKU: ATAUL91	$99.50
The Atrium Lock	Exact replacement for the original Atrium Lock and Atrium II single point (one locking point) mortise lock. Not a replacement for multi-point locks. Complete lockset - all components included. European profile cylinder with Schlage keyway is standard. Lock case with 9-5/8" X 15/16" face plate w/rounded ends (see lock case - ATAUL5 for complete dimensions). 8-1/4" X 1-3/16" brass escutcheon plates with notched corners, three mounting holes, 3-5/8" center to center from handle hole to round part of key hole, 1-7/16" x 7-5/8" door frame strike plate (latch/deadbolt), and 4-1/2" solid brass curved handles. HANDING IS REVERSIBLE FOR DOOR SWING. Additional sets can be keyed alike (two keys supplied). Select that option when ordering. LIMITED TIME OFFER for polished chrome finish. REDUCED FROM $139 Polished Chrome available. See drop-down menu on order form.
		Order Now