| Click on the items below for a description and detailed picture.
|
|
SKU
|
Item Name
| |
Current Category : Sliding Door
|
SKU: ATGL19IPA |
$39.00 |
|
|
Aspen Sliding Door Handles |
High-pressure die cast zinc with powder coat finish. Handle sets only as supplied by Woodgrain Millwork for their 1-3/4" thick Atrium Sliding patio doors. Base price for white sets without keyed cylinders which are supplied separately and must be attached by customer, instructions included. Standard 3-15/16" mounting cross-hole spacing, side under-plate mounted turn lever for latching, 1" X 7-1/2" escutcheon plates, handle mounting holes are 5-1/2" on centers. Lock case is not included. Non-handed. |
|
|
|
Order Now
|
|
|
SKU: ATAUL90 |
$69.99 |
|
|
Atrium Lock Trim Kit |
Trim kit for The Atrium Lock. Trim includes all components except lock case which is available seperately (ATAUL5). 1-3/16" X 8-1/4" escutcheon plates with notched corners and three mounting holes, Euro cylinder with Schlage keyway, 4-1/2" curved handles, (important!) 3-5/8" center to center from handle hole to round part of key hole, 1-7/16" X 7-5/8" strike plate. Polished Brass
LIMITED TIME OFFER
REDUCED FROM $99.00 |
|
|
|
Order Now
|
|
|
SKU: ATAUL90 AB |
$144.00 |
|
|
Atrium Lock Trim Kit Antique Brass |
Trim for The Atrium Lock in Antique Brass finish. Does not include lock case which is available seperately. See Polished Brass Trim Kit description for dimensions (important!). |
|
|
|
Order Now
|
|
|
SKU: ATAUL90 ORB |
$144.00 |
|
|
Atrium Lock Trim Kit Oil Rubbed Bronze |
Trim kit for The Atrium Lock in Oil Rubbed Bronze finish. Lock case not included which is available seperately. See Polished Brass Trim Kit description for dimensions (important!). |
|
|
|
Order Now
|
|
|
SKU: ATAUL90 SN |
$144.00 |
|
|
Atrium Lock Trim Kit Satin Nickel |
Trim kit for The Atrium Lock in Satin Nickel finish. Does not include lock case which is available seperately. See Polished Brass trim Kit description for dimensions (important!). |
|
|
|
Order Now
|
|
|
SKU: ATGL 19SCL |
$45.00 |
|
|
Legacy Sliding Door Handles |
Designed to mount on vinyl and wood sliding patio doors, these are excellent upgrade replacements that are also used by OEM manufacturers. All visible parts are solid brass or die-cast zinc and are available in a wide variety of plated finishes or powder coated colors. Uses standard 3-15/16" cross mounting holes. Handle mounting holes are 5-1/2" on centers. Plates are 1" x 8-1/2". Optional installed key-lock cylinders are available and thumb-switch location must be specified. Thumb-switch for latching is face mounted on the interior plate and is either center located or offset to the bottom. These sets are non-handed and lock case (latch) is not included. Base price for white non-keyed set. |
|
|
|
Order Now
|
|
|
SKU: MULTIPT WG |
$78.00 |
|
|
Multi-point Trim Active |
Trim for 1-3/4" thick active door. Fits multi-point hardware by G-U and Imperial USA used on current Atrium doors by Woodgrain Millwork. Features US cylinder with Schlage "C" keyway and interior thumb-turn for locking, 4-1/2" levers with 1-7/8" projection, escutcheon plates measure 1-1/16" X 8-5/8". Two mounting screws with center to center (c-c)measurement of 7-5/8", top screw to handle c-c 2-9/16", and handle to lock c-c of 3-5/8" (92mm). Non-handed, shown and priced in polished brass finish. Other finishes listed in drop down menu. |
|
|
|
Order Now
|
|
|
SKU: MULTIPT2 WG |
$67.00 |
|
|
Multi-point Trim Semi-active |
Trim for 1-3/4" thick French Doors. Semi-active (secondary)door hardware displayed and priced in polished brass finish. Fits multi-point hardware by G-U and Imperial USA used on current Atrium doors by Woodgrain Millwork. Features an interior thumb-turn for locking, 4-1/2" levers with 1-7/8" projection, escutcheon plates that measure 1-1/16" X 8-5/8". Two mounting screws with center to center (c-c)measurement of 7-5/8", top screw to handle c-c 2-9/16", and handle to lock c-c of 3-5/8" (92mm). Non-handed. Other finishes available on drop down menu. |
|
|
|
Order Now
|
|
|
SKU: ATGL 19SCW |
$28.50 |
|
|
Oak Pull Sliding Door Handle |
Sliding patio door handles with light oak interior handle, 1" x 7-3/16" tapered face plate and side mount under-plate thumb turn for latching. Mounting holes are standard 3-15/16" on centers. Outside pull has knockout for optional brass keylock cylinder. Can be used on various types of doors. Lock case (latch) not included and set is non-handed. |
|
|
|
Order Now
|
|
|
SKU: ATGL19IPW |
$42.00 |
|
|
Windsor Slider Handle Set |
High-pressure die cast zinc construction with powder coat finish. Handle sets only as supplied by Woodgrain Millwork for their 1-3/4" thick Atrium Sliding Patio doors. Base price for non-keyed units. Keyed cylinders are available at an upcharge and must be installed by the customer, instructions included. Standard 3-15/16" mounting cross-hole spacing, slide under-plate mounted thumb lever for latching, 1" x 7-1/2" escutcheon plates, mounting holes are 5-1/2" on centers. Non-handed. Lock case (latch)not included. |
|
|
|
Order Now
|
|
